Spacer

Publikation

Preview of the upcoming „Actuated Valve Assembly“ module in CONVAL®
27 August 2020

In June 2019, the recommended practice S2812-X-19 was published by WIB at Valve World Americas Conference. The RP (Recommended Practice) is called „Actuated Valve Assembly -A Recommended Practice for Part turn Automated On-Off valves“ and addresses the issue of the framework, including definitions, of the sizing and selection and mechanical integrity of the industry’s most common automated valve assemblies.
Since F.I.R.S.T. extensively supported the development of the RP both procedurally and with demonstrable prototypes, it is naturally obvious that a module in CONVAL® will soon be available that comprehensively maps the RP. This is procedurally further supported by the International Standards Organization (ISO) to accept the proposal and publish an ISO standard based on the RP.

How to solve the Actuated Valve (AV) Assembly Torque Requirement Puzzle?
03 Dezember 2018

An article on the What, Why, How and the potential benefits to size & select Fit for the Application Actuated Valve Assemblies (Picture 1), called also Automated On/Off Valves, Emergency Shutdown Valves (ESDV), Blowdown Valves, Automated Block Valves, or other named valves within the process industry…

Catching unfit control valves
22 März 2017

How do you catch those unfit control valves during your project before it is too late? I mean too late before it really hurts! Before it eats your energy! Before it gives you sleepless nights! During my 42 years in the petrochemical industry, working 35 years for an American oil and gas major, I was often involved in large and mega projects as the automation engineer responsible for the engineering, commissioning and startup of instrumentation and control including those control valves.

Anwendung von KPIs zur Bestimmung der Armaturenzuverlässigkeit in Großprojekten
13 Januar 2017

Projekte im Großanlagenbau bergen ganz eigene Herausforderungen. Es ist daher nicht ungewöhnlich, dass beim Anfahren und beim Übergang zum zuverlässigen Dauerbetrieb der Anlage Probleme auftauchen können.

Ein neues CAT auf der NPQC Bühne
27 Mai 2014

Vorstellung eines neuen CAT auf der NPQC Bühne, welches den Schwerpunkt auf Regelarmaturen hat. Sie wissen nicht was das sein soll? Dann lesen Sie den Artikel und lassen Sie es sich erklären. (Artikelsprache: Englisch)

Performance-Analyse von Armaturen durch einen Zuverlässigkeitsindex in CONVAL®
05 Juli 2012

Auf der ACHEMA 2009 hat die F.I.R.S.T. GmbH den „Key Performance Indicator“ "Ci" für die statische Regelgüte in der Ventilauslegungssoftware CONVAL® vorgestellt. Auf der ACHEMA 2012 wird nun mit dem Zuverlässigkeitsindex "Ri" ein weiterer KPI vorgestellt, der die Zuverlässigkeit einer Armaturenanwendung im gesamten Regelbereich beschreibt. Damit ist eine Performance-Analyse für Armaturen so einfach wie nie zuvor, sogar für „Nicht-Ventilexperten“.

Tagesagenda und Vorträge
14 November 2011

Teil I des Begleitmaterials zum 2ten CONVAL Usermeeting am 26.10.2012 in Essen. Hier finden Sie die Tagesagenda sowie die Rahmenvorträge des Tages.

Controllability Index: the effective CONVAL® approach to optimize your valve configuration
07 Oktober 2009

Zuletzt war die Regelgütevorhersage in Fachkreisen immer wieder Gegenstand von Diskussionen und Debatten, und es ist davon auszugehen, dass im weiteren Verlauf des Jahres eine praktische und objektive Anwendungsrichtlinie zur Regelgüte vorgestellt wird, die sich an den Bedürfnissen des Endnutzers orientiert. Im Hinblick auf eine effiziente Suche nach der optimalen Ventilkonfiguration während der ersten Phase der Auslegung und Auswahl von Ventilen wurde in CONVAL® 8.0  ein statischer Regelgüteindex vorgestellt und implementiert.

Optimierte Auslegung und Auswahl von Ventilen mit einem Regelgüteindex
06 Oktober 2009

Zuletzt war die Regelgütevorhersage in Fachkreisen immer wieder Gegenstand von Diskussionen und Debatten, und es ist davon auszugehen, dass im weiteren Verlauf des Jahres eine praktische und objektive Anwendungsrichtlinie zur Regelgüte vorgestellt wird, die sich an den Bedürfnissen des Endnutzers orientiert. Im Hinblick auf eine effiziente Suche nach der optimalen Ventilkonfiguration während der ersten Phase der Auslegung und Auswahl von Ventilen wurde in CONVAL® 8.0 ein statischer Regelgüteindex vorgestellt und implementiert.

Nanhai revisited
31 Januar 2006

Interview with lead engineer for instrumentation and control Mr. Teun Hooftman.

The April 2005 issue of Valve World included an article looking at the 4000 control valves being specified for the massive Nanhai project in China. This follow-up article takes control a step further, looking at the 60-odd severe service control valves that have been specified.

The solutions were found with the help of CONVAL. 

Plant design and control valve selection under increasing cost and time pressure - Part II
31 Mai 2005

This is the second and final section of Mr Siemers´ technical paper addressing plant design and control valve selection when working under increased time and cost pressure. The first section (April issue) focused on control valve operating points and provided a case history involving a mismatch before introducing better valve sizing practices.

Plant design and control valve selection under increasing cost and time pressure - Part I
31 März 2005

Following a career spanning three decades, Mr Siemers is well aware of the pitfalls to be avoided when specifying control valves for a range of demanding applications.

In his latest paper for Valve World, he looks further into plant design and control valve selection when working under increased time and cost pressure. This article is split into two parts: broadly speaking, part one looks at control valve operating points and provides a case history involving a mismatch.

Control valve design aspects for critical applications in petrochemical plants– part III
30 September 2004

This final section of Mr Holger Siemers article on control valve design and sizing continues on from part I+II, which can be found in the June and August 2004 issue of Valve World.

 

Control valve design aspects for critical applications in petrochemical plants– part II
31 Juli 2004

This second section of Mr Holger Siemers article on control valve design and sizing continues on from part I, which can be found in the June 2004 issue of Valve World. This section presents information on design, size and use of severe service control valves, the kind of troubles that can be predicted with control valve sizing as well as suggestions for troubleshooting control valve failures. The final section, part III, will be ready and waiting in the upcoming October issue.

 

Control valve design aspects for critical applications in petrochemical plants –part I
31 Mai 2004

With three decades of experience in demanding applications, Mr Siemers has a deep appreciation of developments and trends in sizing control valves. In this paper, he reviews the past, present and future of valve design and sizing, taking all-important issues such as increasing cost pressure and time pressure into account. This paper is presented in two parts: firstly, how to use manufacturer independent software to analyze given or calculated plant parameters in more detail from an overall point of view with a complete power check and optimizing possibilities.

Berechnung vom Dampfumformventilen mit CONVAL®
31 Januar 2002

Seit langem schon gibt es herstellerspezifische wie auch unabhängige Softwarelösungen, um verschiedenste Arten von Stellventilen auszulegen und zu optimieren.

CONVAL® hat bisher das Spektrum vom Hubventil über Klappen und Kugelhähne bis hin zum Membranventil mit allen nötigen Zusatzberechnungen abgedeckt.

Im kommenden Release 6.0 wird das Paket unter anderem auch durch Optionen zum Auslegen von Dampfumformventilen und dem dazugehörigen Einspritzventil erweitert.

 

Design of Control valves for gases with high differential pressures
28 Februar 2001

The fact that fluid properties are unknown and typical values for ideal gases are assumed by way of approximation frequently results in the over dimensioning of actuation systems for high differential pressure systems.

The isentropic exponent (kappa) and the valve factor xT can, in particular, have an enormous influence on the coefficient of flow Kv needed. The use of CONVAL® 5.0 software for design with integrated thermodynamic physical data computation and a valve database virtually eliminates such errors.

Stellventilauslegung für Gase mit hohen Differenzdrücken
28 Februar 2001

Bei der Auslegung von Ventilen für hohe Differenzdrücke kommt es häufig zur Überdimensionierung der Stellgeräte, da wichtige Stoffeigenschaften nicht bekannt sind und näherungsweise typische Werte idealer Gase angenommen werden. Besonders der Isentropenexponent (kappa) und der Ventilfaktor xT können enormen Einfluss auf den benötigten Durchflusskoeffizient Kv haben.

Durch den Einsatz von CONVAL® 5.0 zur Auslegung mit integrierter thermodynamischer Stoffdatenberechnung und Ventildatenbank werden solche Fehler nahezu ausgeschlossen.

Prozeß- und Energiemanagement von Stellventilen und Rohrleitungseinbauten mit CONVAL® 5.0 für Windows
08 September 1999

Der Beitrag beschreibt das Programm CONVAL® 5 für Windows, das nun nach mehrjähriger Entwicklung seine Markteinführung erlebt. Dazu werden zunächst Probleme der zeitkritischen Anlagenplanung aufgezeigt mit besonderem Blick auf den Anlagen- und Stellgeräteparameter Ventilautorität dp100/dp0 und einer stetigen Ventilkennlinie zwischen linear und gleichprozentig.

Von A bis Z durchgerechnet
09 Oktober 2000

In Anlagenstrukturen findet sich
häufig eine Vielzahl von Komponenten, die eine exakte Auslegung und Berechnung erfordern. CONVAL® ist ein Softwarepaket, das den Betreibern und Planern von Anlagen an dieser Stelle die Arbeit erleichtern soll. Ein Beispiel aus der Praxis verdeutlicht die Einsatzmöglichkeiten.